Untitled-4
IPD2400_61284

Lab Gruppen IPD 2400

Product Description

Brawn with brains.
Delivering 2 x 1200 W at 4 ohms, IPD 2400 packs reliable power and performance into 1U. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency.
The DSP also provides extensive protection for your loudspeaker system, in the form of the innovative software-controlled Speaker Protect Limiter, configured with ease from within IntelliDrive Controller software. Harnessing all of this power is child’s play thanks to the IPD LoadLibrary, a collection of Lab.gruppen released presets – for quick configuration and optimization of a wide range of loudspeaker systems, both generic and popular brand models.
Take control, at the rack or anywhere
All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board.
Most users will also want to take advantage of the advanced, Ethernet-based networked monitoring and control features. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters.
Exceptional I/O flexibility
With AES3 digital inputs standard, IPD 2400 connects directly to digital console stage boxes, or accept AES input within a fixed digital network installation, eliminating a D-A/A-D conversion cycle. Additionally, AES3 inputs can be set for automatic fail-over to analog (perfect for keeping the show going, or in case of installations – maintaining system integrity for mission-critical PA/VA system applications), and input mixing is available for all four inputs. At the power output end, connections are available on binding posts or Neutrik speakON

Model

General

Number of channels

Max total output all channels driven

Peak output voltage per channel

Max output current per channel

Max output power all channels driven

2 ohms

4 ohms

8 ohms

16 ohms

Performance

THD 20 Hz – 20 kHz at 1W

THD at 1 kHz and 1 dB below clipping

Signal to Noise Ratio

Channel separation (Crosstalk) at 1 kHz

Frequency Response

Input impedance

Common Mode Rejection (CMR)

Output impedance

Gain, Sensitivity and Limiters

SCVPL

Sensitivity for full power

Gain (all DSP controls set to 0 dB)

Level adjustment (per channel)

Connectors and Buttons

Analog input connectors (per ch.)

Analog input link connectors (per ch.)

AES input connectors (per ch.)

AES input link connectors (per ch.)

Output connectors (per ch.)

Buttons

Encoder

Documents

pdf F81 User Guide v1.1